1. Rolling Launch allows you to roll race at the touch of the button. To set, enter the map switch mode in which Rolling Launch is activated. Press and hold the cruise control set button to build boost, adjust your speed with the accel pedal to match your opponent aaand…release the set button and enjoy! The system can be set up using activation time limits, temperature limits and a minimum re-arm time to maintain reliability.

1. Switch between a range of soft to hard burble on the fly, or even disable completely in Sport for full stealth mode.

1. No more worries about calculating the ethanol in the tank; our RaceROM self-adjusting flex-fuel does it all for you. Just fit a CANbus enabled Flex Fuel sensor, and off you go. Whatever Ethanol content in the tank, the tune will automatically adjust to give you optimal performance. In addition, there are fail-safes to prevent engine damage if your sensor fails. Link up with ECU Connect or use the Sports Display to display the current Ethanol blend. A quick check can be carried out when stationary just by pressing the cruise control button to sweep the tacho needle to display ethanol percentage up to 70%

1. Add a range of external sensor inputs. For example:
   1. Zeitronix ECA-2 ethanol sensor
   2. Zeitronix ZT-3 wideband sensor
   3. Innovate LC-3 multi-sensor
   4. ECUmaster CANswitch
   5. Autosport AnalogX
   6. Custom user-defined CAN sensor
2. CAN devices such as the AnalogX allow for multiple variable inputs that can be used to import 0-5v sensors, driver trim switches or even a combination including a 0-5v ethanol content signal.
3. Fail safe’s can be set up to activate in the event of an input device failure

1. Add external drivers or controllers for boost solenoids, water injection, nitrous control, and even secondary port injection. 

1. Using the Motiv Motorsport Reflex Box, you can bolt on a control aftermarket port injectors, releasing the power from those bigger turbos and fuel pumps to deliver the maximum performance from your modifications.

1. Display and adjust your max torque using the sports display or use it as an additional dashboard display to show ECU parameters.

1. Put the car into a low power mode with limited speed and range, either as a security measure or to allow the car to be limited when handed over to a third party. This still leaves all four Map Switch modes available for your choice of setups.

ECU Connect – Use your Phone to control your tune

ECUTEK free ECU Connect App can be used to create dashboards, read and clear DTCs and control some of our custom RaceROM features in conjunction with ECUTEK ECU Connect Interface. You can find more information on ECU CONNECT Here

1. Switch between four different modes as detailed above on the fly using your phone.

1. Adjust the above parameters live in each mode via the RaceROM boost and torque controller, using sliders on your phone.

1. You have up to five features that can be controlled using your mobile device. Configurable as a slider, numerical value or on/off switch, these inputs can be set up to interact with the ECU directly from the driver’s mobile device. Speak to your tuner to discuss what you would like.

1. Make your Traction Control more or less aggressive
2. Activate your Nitrous
3. Set up a Push To Pass button
4. Set up a pit lane speed limiter
5. Adjust your pedal map